2009-2010Catalog By September 2008

Chop Saws & Radial Arm Saws

These saws are designed similar to the General Purpose saw but with a negative hook angle to prevent grabbing. This saw provides excellent crosscuts on all materials.  For cutting Non-Ferrous, check page 21 & 22.
 
DIAMETER
TEETH DESIGN KERF PLATE BORE HOOK ORDER  ID 
8 ½” 60T ATB .102” .071” 5/8” -5 RA85060
10” 40T ATB .126” .087” 5/8” -5 RA1040A
10” 40T TCG .126” .087” 5/8” -5 RA1040T
10” 60T ATB .126” .087” 5/8” -5 RA1060A
10” 60T TCG .126” .087” 5/8” -5 RA1060T
10” 60T ATB .080” .060” 5/8” -2 RATH1060800
12” 40T ATB .134” .094” 1” -5 RA1240A
12” 60T ATB .134” .094” 1” -5 RA1260A
12” 60T 　 .126” 　 5/8” 　 RA1260A58
12” 60T TCG .134” .094” 1” -5 RA1260T
12” 80T ATB .134” .094” 1” -5 RA1280A
12” 80T TCG .134” .094” 1” -5 RA1280T
12” 80T ATB .110” .079” 1” -5 RATH1280A
12” 80T TCG .110” .079” 1” -5 RATH1280T
14” 40T ATB .160” .120” 1” 0 RA1440
14” 40T ATB .184” .134” 1” 0 GA1440
14” 60T ATB .160” .118” 1” 0 RA1460A
16” 40T ATB .165” .126” 1” -2 RA1640
16” 60T ATB .165” .126” 1” -2 RA1660
450mm 40T ATB 4.7mm 3.4mm 35mm 15 RA4503540
450mm 60T ATB 4.7mm 3.4mm 35mm 15 RA4503560
18” 60T ATB .189” .134” 1” -5 RA1860
18” 80T ATB .189” .134” 1” -5 RA1880