2009-2010Catalog By September 2008

 

Mitre & Double Mitre Saws

MS and MD series saws are designed for mitre saw machines to cut molding or picture frame material. Saws with CTC (California Triple Chip) design are made to cut any wood or light metal without changing blades for different materials. For heavy aluminum or when only cutting non-ferrous metals, see Non-Ferrous Saws on page 21 & 22 .

DIAMETER TEETH DESIGN KERF PLATE BORE HOOK ORDER  ID 
8” 60T ATB+R .112” .079” 5/8” -2 MD860
8 1/2” 40T ATB+R .102” .071” 5/8” -2 MD85040 
9” 60T ATB+R .112” .087” 5/8” 0 MD960
9” 80T ATB+R .112” .087” 5/8” 0 MD980
10” 80T ATB+R .118” .094” 5/8” -2 MD1080
10” 90T CTC .126” .098” 5/8” -2 MDC1090
10” 100T ATB+R .118” .094” 5/8” -2 MD1010
275mm 80T ATB 3.2mm 2.4mm 32mm 15 MD27580
275mm 100T ATB+R 3.0mm 2.4mm 32mm 0 MD275100
12” 80T ATB .126” .102” 5/8” -2 MD1280ATB
12” 80T ATB+R .126” .102” 1” -2 MD1280R
12” 80T ATB+R .126” .102” 5/8” -2 MD1280P
12” 96T CTC .134” .110” 5/8” -2 MDC1296
12” 100T LRLRS .126” .094” 1” 0 MS-050
12” 100T ATB+R .126” .102” 1” -2 MD1210R
12” 100T ATB+R .126” .102” 5/8” -2 MD1210P
14” 80T ATB+R .134” .110” 5/8” -2 MD1480P
14” 80T ATB+R .134” .110” 1” -2 MD1480R
14” 100T ATB+R .134” .110” 1” -2 MD1410R
14” 100T ATB+R .134” .110” 5/8” -2 MD1410P
350mm 100T TCG 3.5mm 2.8mm 30mm -2 MD3503010T
350mm 100T ATB+R 4.2mm 2.8mm 30mm -2 MD3503010G
15” 100T ATB+R .138” .098” 1” -2 MS1510
 

10” and 12” mitre saw blades have 4 laser slits in the plate for vibration and noise control.  In addition, the chromed body makes cleaning easy and rust free.

Since their introduction in 2001, the 10”x 80T, 10”x 100T, 12”x 80T, 12”x 100T mitre blades have gained great  attention among the picture framing shops.