2009-2010Catalog By September 2008

 

Panel Saws

Designed for use on panel machines for cutting MDF, particle board, laminates, and bonded materials. All Panel Saws are made with SuperMicro-Sheen C-11 sub-micron carbide for longer life. Machine applications listed are only a guideline. All Panel Saws have a 10 degree hook angle.

DIAMETER mm TEETH BORE & PINHOLE mm KERF mm PLATE mm DESIGN ORDER ID FOR USE ON
300 60T 30 4.4 3.2 TCG PS3003060T Mayer, Scheer
300 60T 80 4.4 3.2 TCG PS3008060T Mayer, Scheer
300 72T 30, 2/7/42 + 2/10/60 3.2 2.2 ATB GAM3003072 Altendorf, Scheer
300 96T 30, 2/7/42 + 2/10/60 3.2 2.2 ATB GAM3003096 Altendorf, Scheer
320 72T 50 4.4 3.2 TCG PS3205072T Giben
350 54T 30 4.4 3.2 ATB PS3503054A Mayer, SCM
350 54T 30 4.4 3.2 TCG PS3503054T SCM
350 72T 30 4.4 3.2 ATB PS3503072A SCM
350 72T 30 4.4 3.2 TCG PS3503072T SCM
350 72T 1 1/4” 4.4 3.2 TCG PS350Q72T SCM
350 72T 50, 4/12.5/80 4.4 3.2 TCG PS3505072T 　
350 54T 75 4.4 3.2 ATB PS3507554A Giben, Homag
350 72T 75 4.4 3.2 TCG PS3507572T Giben, Homag
350 72T 80,  4/9/100 + 2/7/110 + 2/14/110 4.4 3.2 TCG PS3508072T SCM, Gabbiani
2/7/110 + 2/14/110  Gabbiani
370 72T 30,  2/10/60 4.4 3.2 TCG PS3703072T Shelling
380 72T 30, 2/14/100 4.4 3.2 TCG PS3803072T 　
380 60T 60, 2/14/100 4.4 3.2 TCG PS3806060T Holzma
380 72T 60, 2/14/100 4.4 3.2 TCG PS3806072T Holzma
60
380 72T 60, 2/14/100 4.8 3.4 TCG PS3806072TB Holzma
60
400 60T 30 3.5 2.5 ATB PS4003060A 　
400 72T 30 4.4 3.2 TCG PS4003072T Shelling
ng
400 60T 75 4.4 3.2 TCG PS4007560T Giben, Homag
400 72T 60, 2/14/100 4.4 3.2 TCG PS4006072T Holzma
60
400 60T 80,  2/9/130 + 4/19/120 4.4 3.2 TCG PS4008060T Selco
400 72T 80,  4/9/100 + 2/9/110 + 2/14/110 4.4 3.2 TCG PS4008072T Gabbiani
2/9/110 + 2/14/110
420 72T 60, 2/14/100 4.8 3.4 TCG PS4206072T Holzma
60
430 72T 80,  2/9/130 + 4/19/120 4.4 3.2 ATB PS4308072A Selco
450 72T 30 4.4 3.2 TCG PS4503072T 　
450 72T 60, 2/14/125 4.8 3.4 TCG PS4506072T Holzma
60
450 72T 80,  2/9/130 + 4/9/120 4.4 3.2 ATB PS4508072A Selco
450 72T 80,  2/9/130 + 4/9/120 4.4 3.2 TCG PS4508072T Selco
460 72T 30,  2/7/110 + 2/14/110 4.4 3.2 TCG PS4603072T Holzma
480 60T 30 4.4 3.2 TCG PS4803060T Shelling
480 72T 30 4.4 3.2 TCG PS4803072T Shelling
480 72T 80,  2/9/130 + 4/9/120 4.8 3.5 TCG PS4808072T Selco
500 72T 60,  2/11/115 + 2/19/120 5 3.5 TCG PS5006072T Holzma
500 72T 75, 2/11/115 + 2/19/120 5 3.5 TCG PS5007572T Giben
500 72T 80,  2/14/110 5 3.5 TCG PS5008072T Gabbiani
520 60T 60,  2/11/115  4.8 3.5 TCG PS5206060T Holzma
530 60T 30 5 3.5 TCG PS5303060T Shelling

 

Panel Saws (cont.)

Designed for use on panel machines for cutting MDF, particle board, laminates, and bonded materials. All Panel Saws are made with SuperMicro-Sheen C-11 sub-micron carbide for longer life. Machine applications listed are only a guideline. All Panel Saws have a 10 degree hook angle.
 
DIAMETER mm TEETH BORE & PINHOLE mm KERF mm PLATE mm DESIGN ORDER ID FOR USE ON
540 60T 60,  2/11/115 + 2/19/120 5 3.5 TCG PS5406060T Holzma
540 84T 60,  2/11/115 + 2/19/120 5 3.5 TCG PS5406084T Holzma
550 72T 100 5 3.5 TCG PS5501072TG Giben
570 60T 60,  2/11/115 + 2/19/120 5 3.5 TCG PS5706060T Holzma
600 60T 60,  2/11/115 + 2/19/120 5.8 4 TCG PS6006060T Holzma
600 72T 60 5.8 4 TCG PS6006072T 　
670 60T 40, 1/11/140 6.2 4.2 TCG PS6704060T 　
670 60T 60, 2/11/14/ + 2/19/120 6.2 4.2 TCG PS6706060T