2009-2010Catalog By September 2008

These saws are designed for ripping soft or hard woods where chiseling action of FTG is effective.  FTG grind is the fastest, most efficient tooth design for ripping.  20 degree hook angle for all rip saws.
 
DIAMETER
TEETH DESIGN KERF PLATE BORE ORDER  ID 
8” 24T FTG .118” .087” 5/8” RF824
9” 24T FTG .126” .087” 5/8” RF924
10” 10T FTG .145” .102” 5/8” RF101
10” 24T FTG .126” .087” 5/8” RF1024126
10” 24T FTG .145” .102” 5/8” RF1024145
10” 24T FTG .126” .087” 70mm/2 key* RF1024K
10” 30T FTG .160” .118” 5/8” RF1030
10” 40T FTG .126” .087” 5/8” RF1040
10” 40T TCG .126” .087” 3”** RSLH10403
10” 40T TCG .126” .087” 4 3/16”** RSLH10404
10” 40T TCG .126” .087” 4.31”*** RSMS1040T
12” 24T FTG .126” .087” 1” RF1224126
12” 24T FTG .134” .094” 1” RF1224134
12” 24T FTG .160” .110” 1” RF1224160
12” 24T FTG .185” .126” 1” RF1224185
12” 24T FTG .126” .087” 70mm/2 key* RF1224K
12” 30T FTG .134” .094” 1” RF1230
12” 30T FTG .165” .118” 1” RF1230160
12” 30T FTG .165” .118” 70mm/2 key* RF1230K
12” 36T FTG .134” .094” 1” RF1236134
12” 36T FTG .165” .118” 70mm/2 key RF1236K
12” 36T TCG .126” .087” 3 1/8” RSM1236TA
12” 36T FTG .126” .087” 3 1/8” RSM1236F
12” 36T TCG .165” .118” 3 1/8” RSM1236TB
300mm 28T FTG 3.4mm 2.2mm 80mm/2 key**** RFRM30028
14” 24T TCG .177” .134” 3 1/8” RSM1424T
14” 24T FTG .142” .102” 1” RF1424
14” 24T FTG .170” .118” 1” RF1424170
14” 24T FTG .194” .134” 1” RF1424194
14” 24T FTG .142” .102” 70mm/2 key* RF1424K
14” 30T FTG .165” .118” 1” RF1430
14” 36T FTG .165” .118” 1” RF1436
14” 36T FTG .142” .102” 70mm/2 key* RF1436K
14” 40T FTG .170” .118” 1” RF1440
16” 24T FTG .173” .126” 1” RF1624
16” 36T FTG .173” .126” 1” RF1636
18” 40T FTG .185” .134” 1” RF1840
20” 40T FTG .185” .134” 1” RF2040

*10”, 12” & 14” - 70mm bores have two 20mm x 5mm keyways for SCM Rip Saws.  **  RSLH comes in 3” or 4 3/16” arbores with 3 pinholes.  Fits Lauderdale Hamilton Rip Saw.  ***  Multi-Score Rip Saw, Split body, sold as a pair.  ****  For Raimann Rip Saw with 4 small 7 mm pins & 2 large 14mm pins, plus 2 keyways.
 

Rip & Gang Saws - ATB

Designed for ripping soft or hard woods where a strong grain pattern can cause saw to drift and follow grain. ATB design helps to maintain direction and provide a clean, straight cut. These can be bored out to fit most gang rip saws. Please call for information on this service.
 
DIAMETER TEETH DESIGN KERF PLATE BORE HOOK ORDER  ID 
7 1/4” 24T ATB .110” .079” 5/8” 20 RS72524
8” 24T ATB .118” .079” 5/8” 20 RS824
8 1/2” 24T ATB .118” .087” 5/8” 20 RS85024
10” 24T ATB .126” .087” 5/8” 20 RS1024
10” 30T ATB .134” .094” 5/8” 20 RS1030
12” 24T ATB .134” .094” 70mm/2 key 20 RS1224K
12” 24T ATB .134” .094” 1” 20 RS1224
12” 36T ATB .126” .087” 1” 20 RS1236
12” 36T ATB .134” .094” 1” 20 RS1236134