2009-2010Catalog By September 2008

Designed for operations requiring an extra smooth cut, such as solid wood pieces that will be glued together. Use these blades for rip cuts only. Glue Joint Rip Saws can be bored out to fit most gang rip saws.   Please call for information and price on this service.
 

DIAMETER
TEETH DESIGN KERF PLATE BORE HOOK ORDER  ID 
10” 30T TCG .125” .087” 5/8” 20 GJ1030125
10” 30T TCG .145” .102” 5/8” 20 GJ1030
12” 36T TCG .160” .118” 1” 20 GJ1236
12” 36T TCG .160” .118” 70mm/2 key 20 GJ1236K
12” 36T TCG .160” .118” 3 1/8” 20 GJM1236157*
12” 50T LRLRS .134” .094” 1” 20 GJL1250
300mm 36T TCG 4.2mm 3.2mm ***80mm/2 key 20 GJRM30036
300mm 48T TCG 2.8mm 2.0mm ***80mm/2 key 20 GJRM3004828
14” 36T TCG .177” .138” 1” 20 GJ1436177
14” 36T ATB .177” .138” 2” / 1 PH 20 GJ1436DA**
14” 36T TCG .177” .138” 2” / 1 PH 20 GJ1436DT**
16” 36T TCG .177” .138” 2” / 1 PH 20 GJ1636**
16” 50T TCG .197” .138” 1” 20 GJ1650
18” 48T TCG .180” .138” 2” 20 GJ1848**

*  Designed for Mereen-Johnson rip saws with 3 1/8” arbor and with one 1/4” keyway.  **  Specially designed for cutting with Diehl saws, 9/16” pin hole at 5” bolt circle.  ***  For Raimann Rip Saw with 4 small 7 mm pins & 2 large 14mm pins, plus 2 keyways.